通達智快速門功能特點:
◇304材質,外形設計新穎、大方、美觀、體現人性化設計,可定做各種外觀;
◇高性能一體控制板,抗干擾能力強,系統穩定,系統穩定,驅動模塊不發熱,功耗低;
◇通過主控板上的內置小按鍵,可設置設備的運行狀態;
◇防夾、防碰傷功能,在擺臂復位的過程中遇阻時,電機停止或者再次打開;
◇防沖功能,在沒有接收到開閘信號時,擺臂轉動5度后鎖死;
◇自動復位功能,開閘后,在規定的時間內未通行時,系統將自動取消用戶的此次通行的權限;
◇具有讀卡帶記憶和不帶記憶功能,且用戶可根據自己的需要通過主板按鍵進行設定;
◇聲、光報警功能:含非法闖入、尾隨報警;
◇6---10對紅外感應,檢測尾隨和防夾;
◇*的設計理念,完善的控制技術,尊貴靚麗的外觀設計,使產品頻頻獲得國內外用戶青睞。
通達智快速門賣點:*外觀設計,完善的控制技術,定位精準可靠,運轉噪音小,速度快;非法闖關上鎖;側面燈光藝術化化處理 ;外殼水晶拉絲處理。
Function and Features :
◇304 stainless steel,Appearance design, generous, beautiful, humanized design.Appearance can be customized;
◇High-performance integrated control panel,strong anti-interference ability,Stability System ,Drive module does not heat,Low power consumption;
◇By small buttons on SRU,can set the device's operating status;
◇Anti Pinch, anti bumps function:When obstacles encountered in the process of arm resetting,motor stops or open again;
◇Scour protection function:When the open signal is not received,arm will be locked after 5 degrees rotation ;
◇Automatic reset function:After turnstile opened,not pass within a specified period of time,the system will automatically cancel the access privileges of users;
◇Read the card with memory and without memory function:Users can be set using the key board according to their needs;.
◇Audible alarm function:Including unlawful entry, trailing alarm;
◇6 --- 10 pairs of infrared sensors to detect the trailing and anti pinch;
◇Unique design, perfect control technology, beautiful and distinguished design ,making products frequently favored by domestic and foreign high-end users。
技術參數:
◇外形尺寸:長1400×寬140×高1000(mm);
◇不銹鋼厚度: 標準1.5mm,可加厚;
◇閘機組成:箱體,擺臂,機芯,控制器,電磁制動器,鋼化玻璃擋板;
◇擺臂長: 300-600mm;
◇擺臂傳動角度:180度;
◇擺動方向: 單向或雙向 ;
◇功率:單機芯60W ,雙機芯120W ;
◇工作電壓: AC220 ±10% V/50 ±10% HZ;
◇驅動電機: 伺服電機 60W/36V;
◇正常使用壽命:1000萬次;
◇開閘時間:0.2秒;
◇輸入接口: 干接點信號或12V電平信號;
◇通信接口: RS485或TCP/IP;
◇通行速度: 40人/分鐘(常開),25-30人/分鐘(常閉);
Technical parameters:
◇Dimensions: (L)1400×(W)120×(H)1000(mm);
◇Stainless thickness: standard 1.5mm,Can thicken;
◇Turnstile components: cabinet, arm, movement, controller, encoder, electromagnetic brake, glass panel;
◇Swing arm length: 300-600mm;
◇Transmission arm angle:180 degree;
◇Swing direction:One-way or two-way;
◇Power: Single movement 50W,double movement 100W ;
◇Operating Voltage: AC220 ±10% V/50 ±10% HZ;
◇Motor: DC motor 40W/24V;
◇Normal life: 500 million times;
◇Gate opening time: 0.2 seconds;
◇Input interface: dry contact signal or 12V level signal;
◇Communication interface: RS485 or TCP / IP;
◇Pass speed: 40 / min (normally open), 25-30 / min (Normally Closed);
通達智快速門